4/11/2007
3
Machine Features
F - 16
WARNING!!!
The machine table must NOT be used as a lifting point. Damage to the saw could occur.
UNLOADING:
Remove the shrink-wrap covering the machine, careful not to damage painted
surfaces. Carefully inspect the machine for physical damage. If damage is noted, notify the
truck line at once. They may require inspection, and that a claim be filed. Check that all
standard accessories are with the machine. Some accessories may be boxed or placed behind the
rear access door. The band saw is provided with a lifting eye that is screwed into the top of the
machine (see illustration on next page). This lifting eye may be located in the rear compartment.
Particular care should be taken in selecting areas of the machine for handling, as electrical
components and adjustment knobs can be marked up or damaged. Remove the mounting bolts
holding the machine to the skid, using the lifting eye, remove the machine from the skid and set in
designated area.
INSTALLATION:
Location of the machine should be taken into consideration with the ability to
move large work pieces. The machine is provided with holes in the base to anchor the unit to the
floor. Shims should be used to properly level the unit. The saw is shipped with an anti-rust
Summary of Contents for F-16
Page 15: ...4 11 2007 15 PARTS BREAKDOWN AND PARTS LIST ...
Page 24: ...4 11 2007 24 ...
