Dake Euromatic 370 S, Instructions Manual

Page: 5 / 64

370 S 370 S L 370 PP 370 PP L
5
Technical Data Non-Ferrous head
Blade Specifications Unit Value
Max. Blade Diameter Mm/inches 370mm/14.5 Inches
Min. Blade Diameter Mm/inches 300mm/12 inches
Blade Type Mm/inches Carbide
Blade Arbor Hole Mm/inches 32mm
Cutting Speeds
2 Speeds (standard) RPM 1500 RPM/ 3000RPM
Head Decent
Max. Head Stroke Mm/inches 228.6mm/9 inches
Head Down stroke Adjustable
Head Feed System Air over Hydraulic
Power consumptions
Drive Motor HP 4.5
COOLANT Pump HP 1/3
Electrical Service 220 volt Volts/Amps 220/20
Electrical Service 440 Volts Volts/Amps 440/16
Air Requirements (PP has accumulator) PSI/CFM 90-100/6
Vises
Main Vise (adjustable) Power Pneumatic
Feed Vise (adjustable) Power Pneumatic
Max Vise Opening Mm/inches 228.6/9
Vise Jaw Height Mm/inches 69.85/2.75
Feed Cylinder (370PP) Mm/inches 508/20
Multiple Stroke Capacity Digital Counter 999 Times
Capacities
Coolant Liter/Gallon Approx. 22.7/5
Gear Box Oil Liter/Gallon Approx. 4.5/1
Piece Counter Range Piece 1-99,999
Blade Protection/Amp Meter Range Adjustable
Miter Capacities
Miter Left Degrees 0-45
Miter Right Degrees 0-12 1/2
Machine Weight
370PP Kilograms/Pound 778/1716
370S Kilogram/Pound 598/1320
Cutting Capacity 90 Degrees 45 Degrees
370PP/370S 101.6mm/4inches 98.42/3 7/8