Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
974355-2
13
REV112019
ADJUSTING PNEUMATIC SYSTEM PRESSURE
The pressure in the pneumatic system necessary for the proper operation of the saw must be
87-101 PSI.
•
Check the pressure by the pressure gauge (11) and use the regulator (12) to set the ideal
pressure.
MAINTENANCE
Before performing any maintenance ensure that the machine is LOCKED OUT and
unplugged.
Special maintenance operations must be carried out by skilled personnel. However, we advise
contacting DAKE. The term special maintenance also covers resetting of protection/safety
equipment and devices.
ROUTINE MAINTENANCE
DAILY MAINTENANCE
•
Check/fill coolant.
•
Check blade wear.
•
Check functionality of safety shields.
•
Make sure emergency stops are working properly.
•
General cleaning and removal of accumulated material.
•
Move head to the full upright position when not in use, helps avoid stress on the return
spring.
WEEKLY MAINTENANCE
•
Sharpen blade if needed.
•
Clean blade housing.
•
Make sure the gearbox is full of oil.
•
Check power cord for any damage.
•
Clean shavings from lubricant tank.
•
Clean and grease the screw and sliding guide vise.
•
Clean the pump suction head and the suction area.
