DAITEM SH271AX, Installation Manual

Page: 9 / 22

GB
107
The type of contact chosen automatically pre-
determines the level of alarm generated.
Nevertheless, it is possible to modify this alarm level.
To configure the alarm level:
• choose the
parameter numbe r to match the contact
to be configured,
• choose the parameter value to match the
characteristics of the contact to be configured.
• Follow the configuration sequence described below:
Type
of contact
Parameter
n°
Contact
characteristics
Parameter
vaue
Built-in 4
intrusion 1
prealert 2
deterrence 3
warning 4
External 5
intrusion 1
prealert 2
deterrence 3
warning 4
LED indicator
lamp not lit
LED indicator
lamp lit
about
5 sec.
about 10 sec. about 2 sec. about 10 sec.
To start the
sequence press &
hold the button until
the LED indicator
lamp goes out
Press as many times
as the required
Parameter number
Press & hold
until the LED
indicator lamp
briefly goes out
Press as many times
as the required
Parameter Value
To end
the sequence
press & hold until
the LED indicator
lamp goes out
LED Indicator
lamp lit =
correct
configuration
Sequence