GB
115
In accordance with the new functional requirements of EN50131-2-6, the LED is factory defaulted to be Inactive in
Test Mode. To change this parameter, programme:
!
To test the detector:
1.
connect the lithium battery pack,
2.
clip and screw the detector casing to its base,
3.
press the test button and the detector changes to
test mode
for about
90 sec.
After this period the detector
automatically returns to normal operating mode,
about
5 sec.
about 10 sec.
about
2 sec.
about 10 sec.
2
1 or 2
Press 2 times
depending
on the required
parameter number.
Press the test 1 or 2
times
to select the
required parameter.
• 1: inactive
• 2: active.
Finish
the
programming
by pressing the test
button until the led
is off.
LED lights for 2
seconds to
confirm valid
programming.
Press and hold
and then release
the test button as
soon as the LED
lights for the 2
nd
time.
Commence
the sequence
by pressing the
test button until
the LED is off.
Summary of Contents for SH271AX
Page 1: ... upgraded for e Nova applications ...
Page 22: ...805349 A 05 2013 ...
