GB
105
• Follow the configuration sequence described below:
LED indicator
lamp not lit
LED indicator
lamp lit
about
5 sec.
about 10 sec.
about 2 sec.
about 10 sec.
To start
the
sequence press &
hold the button until
the LED indicator
lamp goes out
Press as many times
as the required
Parameter number
Press & hold
until the LED
indicator lamp
briefly goes out
Press as many times
as the required
Parameter Value
To end
the sequence
press & hold until
the LED indicator
lamp goes out
LED Indicator
lamp lit =
correct
configuration
Start
Press 3 times
to select
the external contact
Press once
to accept
selection
Press 2 times
to select
the NC contact
End
Configuration example:
configuring the multicontact detector with an external contact (
Parameter n° 3
) connected
to a wide gap normally closed contact (
Value 2
). An intrusion alarm is generated when the garage door is opened.
3
2
Sequence
Summary of Contents for SH271AX
Page 1: ... upgraded for e Nova applications ...
Page 22: ...805349 A 05 2013 ...
