2
User guide
You have just bought
a DAITEM security system,
designed to cover all your
protection needs.
We would like to thank you
for your confidence.
With TwinBand
®
‚
and TwinPower
®
, you will
benefit from the flexibility
of a totally wire-free system
based on dual band radio
technology
and a doubly secure power
supply.
IMPORTANT ADVICE
Your security system is simple to use. We advise you to switch it on (arm) every
time you leave your home.
Do not leave your remote control in view.
Keep a back-up remote control in a secret place.
If one of the devices in your system is lost, stolen or sabotaged, call your installer
right away.
Keep the access codes to your remote control keypads secret.
SOME PRECAUTIONS TO FOLLOW
When you are at home
Do not leave entrances (doors and windows) open for no reason.
Switch your system to partial protection mode (Part Set) to protect unoccupied
rooms.
When you leave home
Close all the protected doors and windows.
Switch on (arm) your security system.
If necessary, check for any indications of faults or doors and windows left open.
When you're going to be away for a while
Check that all doors and windows are closed.
Check your security system is operating properly by actually testing it.
Switch on (arm) your system
IMPORTANT REMARK
The installer can access your system remotely in order to perform maintenance
or uploading & downloading operations via a telephone and computer accord-
ing to the conditions outlined in this guide. It is up to your installer to define
with you the specific contractual conditions for accessing your system.
WE WOULD APPRECIATE YOUR SUGGESTIONS
If you have any comments about how we might improve our guides and our
products, we would be grateful if you could send them in writing to:
Daitem - Service consommateur
rue du Pré de l’Orme - F-38926 CROLLES cedex
LÉGENDE
important points
recommendations
press once
press and hold
☺
Correct programming is confirmed
by a long beep or the green LED
indicator lamp lighting up.
Incorrect programming is
indicated by 3 beeps or the red
LED indicator lamp flashing.