107
8. Operating test
8.1 Before testing the universal transmitter
• Testing loop n° 1
1.
Connect the lithium battery pack
2.
Clip the detector casing on to its base.
8.2 Testing the power supply
Press the test button once to check that the
battery is working properly. The LED
indicator lamp should light up red.
8.3 Testing the radio links
• Note that when you press & hold the test
button (for approx. 3 sec.) a
“test”
message is issued for loop n° 1.
• Note that when you press the test button
once and then press & hold it (for approx. 3
sec.) a
“test”
message is issued for loop n°
2.
(For more details, see the chapter on
Checking radio links described in the manual
supplied with the alarm control panel).
Press & hold the key
(approximately 3 sec.) until
the control panel responds
Press
once
then
)
)
)
)
)
)
)
)
)
)
or
• Testing loop n° 2
Press & hold the key
(approximately 3 sec.) until
the control panel responds
)
)
)
)
)
)
)
)
)
)
“beep, detector X, group Y, immediate
(or delayed or combined)”
“beep, detector X, group Y, immediate
(or delayed or combined)”
or
“beep, remote control X”
“beep, remote control X”
IMPORTANT
• For a technical detector:
• For a fire detector:
“beep, technical detector X”
“beep, fire detector X”
Summary of Contents for 221-21 Series
Page 111: ...111 ...
