1
Instruction Manual ........................... P2 ~ 9
Manuel D
’
instructions ....................... P10~17
Istruzioni D
’
uso .................................. P18~25
Manual de instrucciones ..................... P26~33
Bedienungsanweisung .................... P34~41
Οδηγιες
Χρησεως
............................. P42~49
MANUAL DO UTILIZADOR ........... P50~57
2
BURSH CUTTER
Instruction Manual
Caution :
Be sure to read this instruction manual before use. Use the machine only after fully understanding its
contents. If you lend the Brush cutter, also lend the manual with it. The operator should only use the
equipment after receiving full instructions on safe operation.
CONTENTS
SYMBOLS ...................................................... 2
INSPECTIONS BEFORE STARTING ENGINE .........................7
NOTES FOR SAFE USE ................................. 3
STARTING / STOPPING ENGINE ............................................7
SPECIFICATIONS .......................................... 5
INSPECTION AND MAINTENANCE ........................................8
CONSTRUCTIONS ......................................... 5
TROUBLESHOOTING .............................................................9
ASSEMBLING BUSH CUTTER ....................... 6
BLADE ....................................................................................9
[1] Introduction
In the event that the machine is damaged during transportation, or any part is found to be missing, please contact
the store which delivered the machine.
[The manufacturer will not be responsible for the above one month or more after delivery.]
[2] Characteristics of Brush Cutter
1. Adoption of our special vibration control device which decreases vibration.
2. Compact with easy and reduced fatigue operation.
3. Easy assembly. A double ended spline shaft is used for the drive shaft which decreases wear.
4. The shoulder band can be easily removed by pulling a knob.
[3] Caution
1. Check the following before starting the engine.
・
Inspect the equipment for any loose parts.
In particular, pay attention to the cutter mechanism.
・
Make sure that no one is standing within a 15m radius.
・
For fuel, use only gasoline mixed with engine oil.
・
Position the blade guard as close to the blade as possible, so that the blade is covered.
SYMBOLS
Pay attention to the following symbols in the manual.
Read the manual.
Pay special attention.
Prohibited. Do not do
…
Keep people 15m away
from the operator.
Be careful of small items
being scattered by the
blades.
No smoking.
Caution: Flammable
Be sure to put the safety
cover on the equipment.
Wear safety gloves.
Be careful of kick-back.
(rebounding).
Make sure that no people or
animals are within the work
area.
Always wear a protective
helmet, glasses and earplugs
(when using the metal cutter).
The maximum allowable
revolutions of the blade.
Emergency stop
Be careful of exhaust fumes.
I-Starting the engine
O-Stopping the engine
Ｍinimum
１５ｍ
10,000r.p.m.
