15
|
Unit installation
Installer and user reference guide
60
R R8T7V1B
VRV IV heat pump for indoor installation
4P499898-1B – 2021.12
15 Unit installation
In this chapter
15.1 Preparing the installation site
Choose an installation location with sufficient space for carrying the unit in and out
of the site.
Do NOT install the unit in places often used as work place. In case of construction
works (e.g. grinding works) where a lot of dust is created, the unit MUST be
covered.
15.1.1 Installation site requirements of the compressor unit
INFORMATION
Also read the following requirements:
▪
General installation site requirements. See the "General safety precautions"
chapter.
▪
Refrigerant piping requirements (length, height difference). See further in this
"Preparation" chapter.
CAUTION
Appliance NOT accessible to the general public, install it in a secured area, protected
from easy access.
These units (compressor unit, heat exchanger unit and indoor units) are suitable for
installation in a commercial and light industrial environment.
NOTICE
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
NOTICE
The equipment described in this manual may cause electronic noise generated from
radio-frequency energy. The equipment complies to specifications that are designed
to provide reasonable protection against such interference. However, there is no
guarantee that interference will not occur in a particular installation.
It is therefore recommended to install the equipment and electric wires in such a
way that they keep a proper distance from stereo equipment, personal computers,
etc.
