background image

15

• Beware of fire in case of refrigerant leakage.

If the air conditioner is not operating correctly, i.e. not gen-

erating cool or warm air, refrigerant leakage could be the

cause. Consult your dealer for assistance.

The refrigerant within the air conditioner is safe and nor-

mally does not leak. However, in the event of a leakage,

contact with a naked burner, heater or cooker may result in

generation of noxious gas.

Do not longer use the air conditioner until a qualified ser-

vice person confirms that the leakage has been repaired.

• Consult your local dealer regarding relocation and

reinstallation of the air conditioner.

Improper installation work may result in leakage, electric

shocks or fire hazards.

• Do not place objects in direct proximity of the

outdoor unit and do not let leaves and other debris

accumulate around the unit.

Leaves are a hotbed for small animals which can enter the

unit. Once in the unit, such animals can cause malfunc-

tions, smoke or fire when making contact with electrical

parts.

• Do not allow a child to mount on the outdoor unit or

avoid placing any object on it.

Failing or tumbling may result in injury.

• The appliance is not intended for use by unattended

young children or infirm persons.

Impairment of bodily functions and harm to health may

occur.

Children should be supervised to ensure that they do

not play with the unit or its remote controller.

Accidental operation by a child may occur in impairment of

bodily functions and harm health.

Do not let children play on or around the outdoor unit.

If they touch the unit carelessly, injury may be caused.

Do not block air inlets nor outlets.

Impaired air flow may occur in insufficient performance or

trouble.

!

CAUTION

NAME OF PARTS

 Refer to figure 1 & 2 on page [1

4

1.

Air outlet (Field supply)

2.

Exhaust duct (Field supply)

3.

Drain pipe

4.

Connection piping

5.

Transmission wiring

6.

7.

Remote controller

 

(Sold separately)

Drain discharge device (built-in)

Discharges indoor moisture removed during cool-

ing operation.

8.

Power line

9.

Grounding wire

This wire releases electricity from the indoor unit

to the ground in order to prevent electric shock or

fire.

10.

Air filter (inside filter chamber)

 

(Sold separately)

11.

Suction filter chamber

 

(Sold separately)

12.

Suction duct (Field supply)

13.

Machine nameplate

The nameplate is imprinted with the machine

name and specifications.

14.

Suction grille

 (Field supply)

15.

Air Filter

Only a qualified person is allowed to perform mainte-

nance except daily maintenance.

Before touching any of connection wirings, be sure to

turn off all power supply switches.

MAINTENANCE

!

WARNING

• Do not use flammable materials (e.g., hairspray or

insecticide) near the product.

Do not clean the product with organic solvents such

as paint thinner.

The use of organic solvents may cause crack damage to

the product, electric shocks, or fire.

• Contact professional personnel about attachment of

result in water leaks, electric shock or fire.

the air conditioner.

Improper cleaning may cause breakage of plastic parts,

water leakage and other damage as well as electric

shocks.

!

CAUTION

Before cleaning, be sure to stop unit operation, turn

the breaker off or remove the power cord.

 Otherwise,

an electric shock and injury may occur.

Do not wash the air conditioner with water, as this may

result in electric shocks or fire.

How to clean the air filter

 

(The air filter is an optional accessory.)

1. Clean the air filter when the display shows “

(TIME TO CLEAN AIR FILTER).

This message is displayed once the unit has operated for

a certain amount of time.

Always clean the air filter at the beginning of the heating or

cooling season.

(Dust and dirt in the air filter reduce airflow, lowering the

unit’s capacity.)

Clean the air filter more frequently when using the unit in a

dirty environment.

NOTES

Do not remove the air filter for other than cleaning pur-

poses.

Doing so may cause damage to the unit.

Do not install any object other than a proper air filter in the

suction inlet (for example, a paper towel). Doing so may

result in degraded performance and cause freezing or

water leakage.

Watch your steps at the time of air filter cleaning or

inspection.

Highplace work is required, to which utmost attention

must be paid.

If the scaffold is unstable, you may fall or topple down, thus

causing injury.

Start or stop the air conditioner with the remote
controller. Never use the power circuit br

eake

r for

this purpose.

Summary of Contents for VRV FXMQ100ARV16

















Reviews: