Daikin VAM 1000FAVE, Service Manual

Page: 34 / 84

SiE71-202 Control Functions
Control Functions 25
Note: 1. All the setting can be made by the remote controller for VRV and HRV unit.
The setting of mode No. 19 (29) and 40 can be made only by the remote controller for VRV unit. The
mode No. 30 is used for the individual setting such as the calculation of power bill, etc.
2. The mode No. in ( ) is used for making individual setting of each unit.
3. Group number setting for centralized controller
1. Mode no. 00: Group controller
2. Mode no. 30: Individual controller
∗
Regarding the setting procedure, refer to the section “Group number setting for centralized control” in
the operating manual of either the on / off controller or the central controller.
Caution 1. The setting positions are set at “01” at the factory.
The ventilation air flow, however, is set at “05” (medium) in the HRV unit. When lower or higher setting
is desired, change the setting after installation.
Indication of
ventilation mode /
Not indication Field
setting 18(28) 4 Indication No
Indication
— — — —
Refer to P54
Fresh up air
supply / exhaust
setting 7 No
Indication
No
Indication
Indication Indication — —
Supply Exhaust Supply Exhaust — —
External input
terminal function
selection
(between J1 and
JC) 8 Fresh up Overall
alarm
Overall
malfunction
Forced
off
Fan
forced off
Air flow
increase
KRP50-2 output
switching
selection
(between 1 and
3) 9 Humidify Abnormal Fan on / off — — —
Air flow setting 19(29) 0 Low Low Low Low High High
Ventilation mode
setting 2 Automatic Total heat
exchange
Normal — — —
Fresh up
operation 3 OFF ON
— — — —
Electric heater
setting 8 No delay No delay ON / OFF
Delay
ON / OFF
Delay
— —
Refer to E/D
“INSTALLATION
MANUAL”
Error record
display Service 40
Refer to
operation
manual for
remote controller
of air conditioner
Forced
ventilation fan On 43
Refer to P56
Unit No.
allocation 45
Refer to P57
Details of setting Mode Setting
mode
Setting
switch
No.
Setting position Operation method
01 02 03 04 05 06