SiBE041012_A
Operation Manual
Operation Manual
60
17
NOTE
90˚
55˚
7m
55˚
Vertical angle 90˚
(Side view)
Horizontal angle 110˚
(Top view)
7m
INTELLIGENT EYE Operation
[Example]
When someone is in the
room
• The air conditioner is in normal
operation while the sensor is
detecting the movement of people.
Normal operation
• The set temperature is shifted in
±2˚C steps.
20 minutes after, start energy
saving operation.
When no one is in the room
• The air conditioner will return to
normal operation when the sensor
detects the movement of people
again.
Back to normal operation.
Someone is back in the
room
INTELLIGENT EYE operation is useful for energy saving
• If no presence detected in the room for 20 minutes, the energy saving operation will start.
• This operation changes the temperature –2˚C in HEAT / +2˚C in COOL / +1˚C in DRY operation from set temperature.
• This operation decreases the airflow rate slightly in FAN operation only.
Energy saving operation
• Do not place large objects near the sensor.
Also keep heating units or humidifiers outside the sensor’s detection area. This sensor can detect undesirable objects.
• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
CAUTION
• Sensor may not detect moving objects further than 7m away. (Check the application range.)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, fluttering curtains and light reflected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during POWERFUL operation.
• NIGHT SET mode
Page 21
will not go on during use of INTELLIGENT EYE operation.
• Application range is as follows.
Notes on INTELLIGENT EYE operation