SiBE041012_A
Operation Manual
Operation Manual
50
2. Operation Manual
2.1
Name of Parts
5
Name of Parts
Indoor Unit
Air outlet
Louvers (vertical blades)
Case
Mode
Orange
Blue
3 min.
5 sec.
5 sec.
2 sec.
2 sec.
2 sec.
Green
DRY :
COOL : Blue
HEAT : Red
FAN :
White
Stop :
Off
TIMER
• Appearance of the indoor unit may differ.
Front panel
Page 13
• The louvers are inside of the air outlet.
Page 13
Page 16
Flaps (horizontal blades)
Model name
plate
Panel tab
• It detects the air temperature
around the unit.
Room temperature
sensor
Page 16
• It detects the movements of
people and automatically
switches between normal
operation and energy saving
operation.
INTELLIGENT EYE
sensor
Air inlet
INTELLIGENT EYE lamp
(green)
Signal receiver and Indoor
unit ON/OFF switch
• It receives signals from the remote
controller.
• When the unit receives a signal, you will
hear a beep sound.
Signal receiver
Operation start
Setting changed
Operation stop
Sound type
beep-beep
beep
long beep
Indoor unit ON/OFF switch
• Press this switch once to start operation.
Press once again to stop it.
• The operation mode refer to the following table.
AUTO
Temperature setting
25˚C
Airflow rate
AUTO
• This switch is useful when the remote controller is
missing.
Orange
Orange
Orange
Orange
Orange
TIMER lamp colour
TIMER lamp colour : For COOL
TIMER lamp
• When operation by timer has been set, the multi-monitor lamp
periodically changes to orange. After lighting orange for about
5 seconds, it returns to the colour of the operation mode.
The multi-monitor lamp will turn orange on and off in cyclic
manner while the air conditioner is not in operation.
FAN
HEAT
COOL
DRY
AUTO
Operation
Orange
White
Red
Blue
Green
Red/Blue
Multi-monitor lamp
• The lamp colour changes according to
the operation.
Multi-monitor lamp
Multi-monitor lamp and
TIMER lamp
Display