English
19
10. FIELD SETTINGS
(1) Make sure the control box lids are closed on the indoor and outdoor units.
(2) Field settings must be made from the remote controller and in accordance with installation condi-
tions.
•
Settings can be made by changing the “Mode No.”, “FIRST CODE NO.” and “SECOND CODE NO.”.
•
The “Field Settings” included with the remote control lists the order of the settings and method of operation.
10-1 Setting ceiling height
•
Select the SECOND CODE NO. that corresponds to the ceiling height “Table 4”.
(SECOND CODE NO. is factory set to “01” for a ceiling height of less than 2.7m .)
Table 4
10-2 Settings for options
•
For settings for options, see the installation instructions provided with the option.
10-3 Setting air filter sign
•
Remote controllers are equiped with liquid crystal display air filer signs to display the time to clean air filters.
•
Change the SECOND CODE NO. according to “Table 5” depending on the amount of dirt or dust in the room.
(SECOND CODE NO. is factory set to “01” for air filter contamination-light.)
Table 5
10-4 Setting indoor unit number of simultaneous operation system
•
When using in simultaneous operation system mode, change the SECOND CODE NO. as shown in
“Table 6”.
(SECOND CODE NO. is factory set to “01” for Pair system (1 unit))
Table 6
•
When using in simultaneous operation system mode, refer to “10-5 Simultaneous operation system indi-
vidual setting” on page 20 section to set master and slave units separately.
Ceiling height (m)
Mode No.
FIRST CODE NO.
SECOND CODE NO.
Less than 2.7 m
13 (23)
0
01
2.7 to 3.5
02
Setting
Spacing time of display air filter
sign (long life type)
Mode No.
FIRST CODE
NO.
SECOND
CODE NO.
Air filter contamination-
light
Approx. 2500 hrs
10 (20)
0
01
Air filter contamination-
heavy
Approx. 1250 hrs
02
Setting
Mode No.
FIRST CODE NO.
SECOND CODE NO.
Pair system (1 unit)
11 (21)
0
01
Simultaneous operation system
(2-unit)
02
Simultaneous operation system
(3-unit)
03
Double twin multi (4-unit)
04
01_EN_3PN06588-4M.fm Page 19 Monday, December 19, 2011 7:04 PM