6
English
5. LABELS AND CORRESPONDING FUNCTIONS
OF THE REMOTE CONTROLLER
The illustrations in this operating manual correspond to the
remote control format BRC1E type.
Refer to Figure 1.
Figure 1
1. Operation Mode Selector Button
•
Used to change the mode.
2. Fan Speed Control Button
•
Used to change the fan control.
3. Menu/OK Button
•
Used to indicate the main menu (For details of the main
menu, see the operations manual.
•
Used to enter the item selected.
Configuration
Current Settings
Clock & Calendar
Daylight Saving Time
Language
*Depending on connected model
Main Menu
Air Flow Direction
Ventilation
Schedule
Off Timer
Celsius/Fahrenheit
Maintenance Information
4. Up Button
•
Used to raise the setpoint temperature.
•
The previous menus items will be highlighted. (The
highlighted items will be scrolled continuously when the
button is pressed continuously.)
•
Used to change the selected item.
5. Down Button
•
Used to lower the setpoint temperature.
•
Items below the currently selected item will be
highlighted.(The highlighted items will be scrolled
continuously when the button is pressed continuously.)
•
Used to change the selected item.
6. Right Button
•
Used to highlight items to the right of the currently
selected item.
•
Display contents are changed to next screen per page.
7. Left Button
•
Used to highlight items to the left of the currently selected
item.
•
Display contents are changed to previous screen per
page.
8. On/Off Button
•
Press once to operate, and press once again to stop.
9. Operation Lamp
•
Green lamp lights up during operation. The lamp will
blink if a malfunction occurs.
10. Cancel Button
•
Used to return to the previous screen.
•
Press and hold this button for 4 seconds or longer to
display service settings menu.
11. LCD (with backlight)
•
The backlight will illuminate for approximately 30
seconds by pressing any operation button.
NOTE: Operate the button while backlight is illuminated. When
one indoor unit is controlled by two remote controllers (main/
sub) only the first controller to be accessed by the user will
illuminate it’s backlight.
6. OPERATION PROCEDURE
Read the operation manual that came with the remote
controller:
• To protect the unit, turn on the main power switch 6
hours before operation.
• If the main power supply is turned off during
operation, operation will restart automatically after the
power turns back on again.
