5 Operation
Operation manual
10
ATXM-A
Daikin room air conditioner
3P728539-4 – 2023.06
5.8
Flash Streamer (air cleaning)
operation
Streamer generates a high-speed electron stream with a high
oxidizing power, reducing bad odours. Together with the titanium
apatite deodorising filter, silver allergen removal air purifying filter
and the air filters, this function cleans the air in the room.
INFORMATION
▪ The high-speed electrons are generated and go away
inside the unit to ensure safe operation.
▪ The Streamer discharge may generate a fizzing sound.
▪ If the airflow becomes weak, the Streamer discharge
may stop temporarily to prevent ozone smell.
5.8.1
To start/stop Flash Streamer (air cleaning)
operation
Prerequisite:
Make sure the unit is operating (
is displayed on
the wireless remote control LCD).
1
Press
.
Result:
is displayed on the LCD and the air in the room is
cleaned when the unit is operating.
2
To stop operation, press
.
Result:
disappears from the LCD and operation stops.
5.9
OFF/ON timer operation
Timer functions are useful for automatically switching the air
conditioner off/on at night or in the morning. You can also use OFF
timer and ON timer in combination.
There are two types of OFF/ON timer setting:
▪
24 hour clock OFF/ON timer
(default). The unit will stop/start
operating at the set time.
Example:
The ON timer is set to 13:30,
the unit will start operating at 13:30.
▪
12 hour countdown OFF/ON timer
. The unit will stop/start
operating after the set number of hours.
Example:
The ON timer
is set at 10:30 to 3 hours, the unit will start operating at 13:30.
Note:
It is possible to combine both timer setting types.
INFORMATION
Program the timer again in case of:
▪ A breaker has turned the unit off.
▪ A power failure.
▪ After replacing batteries in the wireless remote control.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to
6].
5.9.1
24 hour clock OFF/ON timer setting
To start/stop OFF timer operation
1
Press
to start.
Result:
is displayed on the LCD and
blinks.
and the day of the week disappear from the LCD.
2
Press
or
to change the time setting.
3
Press
again.
Result:
and the set time are displayed on the LCD. The Daikin
eye lights orange.
INFORMATION
Each time
or
is pressed, the time setting
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4
To cancel the timer setting, press
.
Result:
The set time and
disappear from the LCD. and the
day of the week are displayed on the LCD. The Daikin eye stops
lighting orange.
INFORMATION
When you set the ON/OFF timer, the time setting is stored
in the memory. The memory will be reset when the
wireless remote control batteries are replaced.
Night set mode
When the OFF timer is set, the air conditioner
automatically adjusts the temperature setting (0.5°C up in
cooling, 2.0°C down in heating) to prevent excessive
cooling/heating and ensure a comfortable sleeping
temperature.
To start/stop ON timer operation
1
Press
to start.
Result:
is displayed on the LCD and
blinks. and
the day of the week disappear from the LCD.
2
Press
or
to change the time setting.
3
Press
again.
Result:
and the set time are displayed on the LCD. The Daikin
eye lights orange.
INFORMATION
Each time
or
is pressed, the time setting
advances by 10 minutes. Holding the button down will
change the setting rapidly.
4
To cancel the timer setting, press
.
Result:
The set time and
disappear from the LCD.
and the
day of the week are displayed on the LCD. The Daikin eye stops
lighting orange.
To combine OFF timer and ON timer
1
To set the timers, refer to
"To start/stop ON timer operation"
10].
Result:
and
are displayed on the LCD.
Example:
Display
Current time
Set while…
Operation
6:00
the unit is
operating.
Stops at 7:00
and starts at
14:00.
the unit is NOT
operating.
Starts at 14:00.
Note:
If the timer setting is active, the current time is NOT displayed
on the LCD.
Summary of Contents for Siesta ATXM20A2V1B
Page 19: ......
