![background image](http://html1.mh-extra.com/html/daikin/siesta-atxm20a2v1b/siesta-atxm20a2v1b_operation-manual_4705566014.webp)
5 Operation
Operation manual
14
ATXM-A
Daikin room air conditioner
3P728539-4 – 2023.06
b
c
a
a
Daikin eye
b
Partly green
c
Red, orange or blue
Daikin eye colour alternates
between partly green and…
…then wireless adapter is…
Red
not connected
orange
running and ready to connect to
the home network via WPS
button; see
blue
connected to the home network:
▪ via SSID + KEY.
or
▪ via the WPS button on the
router.
4
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect the wireless LAN to your home
network
The wireless adapter can be connected to your home network using
the:
▪ WPS button (Wi-Fi Protected Setup) on the router (if present),
▪ The SSID (Service Set Identifier) and the KEY (password) -
located on the unit.
To connect using the WPS button
1
On home screen menu, hold
for at least 5 seconds while
the unit is not operating.
Result:
The SP menu appears. is blinking.
2
Change to the SP menu
by pressing
once or
repeatedly.
1×
(5 sec.)
3
Press
to confirm the selection.
Result:
is blinking. The Daikin eye colour alternates between
orange and partly green.
4
Press the WPS button on your communication device (e.g.
router) within approximately 1 minute. Refer to the manual of
your communication device.
Result:
The Daikin eye colour alternates between blue and
partly green.
INFORMATION
If the connection with your router is not possible, try
procedure
14].
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect using SSID and KEY number
1
On home screen menu, hold
for at least 5 seconds while
the unit is not operating.
Result:
The SP menu appears. is blinking.
2
Change to the SP menu
by pressing
twice or
repeatedly.
2×
(5 sec.)
3
Press
to confirm the selection.
Result:
is blinking. The Daikin eye colour alternates between
red and partly green.
4
Open the ONECTA application on your smart device and follow
the steps on the screen.
Result:
If the connection was successful, the Daikin eye colour
alternates between blue and partly green.
5
Press
to exit the menu.
Result:
The display will return to the default screen.
To reset the connection setting to the factory
default
Reset the connection setting to the factory default in case you want
to:
▪ disconnect the wireless LAN and the communication device (e.g.
router) or smart device,
▪ repeat the setting if the connection was unsuccessful.
1
On home screen menu, hold
for at least 5 seconds while
the unit is not operating.
Result:
The SP menu appears. is blinking.
2
Change to the SP menu by pressing
twice or
repeatedly.
2×
(5 sec.)
3
Hold
for at least 2 seconds to confirm the selection.
Result:
is blinking. The Daikin eye colour alternates between
red and partly green. The setting is reset to the factory default.
4
Press
to exit the menu.
Result:
The display will return to the default screen.
To turn off the wireless LAN connection
If you want to turn off the wireless connection function:
1
On home screen menu, press
for at least 5 seconds while
the unit is not operating.
Result:
The SP menu appears. is blinking.
Summary of Contents for Siesta ATXM20A2V1B
Page 19: ......