Daikin RXYSQ-P8Y1, Technical Data Manual

Page: 34 / 39

• Outdoor Unit • VRVIII-S heat pump • RXYSQ-P8Y1
1
11
• VRV Systems • Outdoor Unit 32
11 Installation
11 - 1 Service Space
RXYSQ-P8Y1
3D045696D
• Obstacle on both sides
100 or more
100 or more
100 or more
100 or more
1000 or more
200 or more
300 or more
500 or less
100 or more
1000 or more
1000 or more
500 or less
150 or more
150 or more
150 or more
500 or less
1000 or more
200 or more
300 or more
1000 or more
500 or m
ore
1000 or more
1000 or more
500 or less
500 or more
1000 or more
1000 or more
500 or less
500
or more
100 or
more
300 or
more
1000
or more
500 or less
1000 or more
250 or more
300 or more
1000 or more
500
or less
500 or more
100 or more
1500
or more
500 or less
1000 or more
1000
or more
500 or less
1000 or more
1500
or more
A
or more
1000 or more
Drain piping construction dimension
Drain piping construction dimension
300
or more
1000
or more
200
or more
2000
or more
100
or more
1500
or more
600
or more
3000
or more
Required installation space
(The unit of these values is ‘mm’)
1. Where there is an obstacle on the suction side:
(a) No obstacle above
(1) Stand-alone installation
• Obstacle on the suction
side
only
(b) Obstacle above, too
(1) Stand-alone installation
The relations between H, A and L are follows:
L A
L ” H 0 < L ” 1/2 H 100
1/2 H < L
”
H 200
H > L Set the stand as: L
”
H
Close the bottom of the
installation frame to prevent the
discharged air from being
bypassed.
(2) Series installation
The relations between H, A and L are as follows
L A
L
”
H 0 < L
”
1/2 H 250
1/2 H < L ” H 300
H < L Set the stand as: L ” H
Refer to the column of L ” H for A
Close the bottom of the
installation frame to prevent the
discharged air from being
bypassed.
Only two units can be installed for this series.
5. Multiple rows of series installation
(on the rooftop, etc.)
(a) One row of stand-alone
installation
(b) Rows of series installation (2 or more)
The relations between H, A and L are as follows
L A
L ” H 0 < L ” 1/2 H 250
1/2 H < L ” H 300
H < L Can not be installed
(2) Series installation (2 or more)
The relations between H, A and L are as follows
L A
0 < L ” 1/2 H 250
1/2 H < L ” H 300
(a) Obstacle above, too
(1) Stand-alone installation
(2) Series installation (2 or more)
2. Where there is an obstacle on the discharge side:
(a) No obstacle above
(1) Stand-alone
installation
(b) Obstacle above, too
(1) Stand-alone installation
The relations between H, A and L are as follows
L A
L
”
H 0 < L
”
1/2 H 750
1/2 H < L
”
H 1000
H < L Set the stand as: L ” H
Close the bottom of the
installation frame to prevent the
discharged air from being
bypassed.
(2) Series installation (2 or more)
The relations between H, A and L are as follows:
L A
L ” H 0 < L ” 1/2 H 1000
1/2 H < L ” H 1250
H < L Set the stand as: L ” H
Close the bottom of the
installation frame to prevent the
discharged air from being
bypassed.
Only two units can be installed for this
series
3. Where there are obstacles on both suction and
discharge sides:
Pattern 1
Where the obstacle on the discharge side is higher than the
unit:
(There is no height limit for obstructions on the intake side)
(a) No obstacle above
(1) Stand-alone installation
Pattern 2
Where the obstacle on the discharge side is lower than the
unit:
(There is no height limit for obstructions on the intake side)
(a) No obstacle above
(1) Stand-alone installation
(2) Series installation (2 or more)
(2) Series installation (2 or more)
(2) Series installation (2 or more)
• Obstacle on the suction side and both sides
(b) Obstacle above, too
(1) Stand-alone installation
• Obstacle on the suction
side, too
• Obstacle on the suction
side and both sides
(2) Series installation (2 or more)
• Obstacle on both sides
4. Double-decker installation
(a)
Obstacle on the discharge side
close the gap A (the gap between
the upper and lower outdoor units)
to prevent the discharged air from
being bypassed
.
Do not stack more than two units.
(b)
Obstacle on the suction side close
the gap A (the gap between the
upper and lower outdoor units) to
prevent the discharged air from
being bypassed
.
Do not stack more than two units.
L > H
L > H
L ” H