4
FA ROTEX A1 BOe - 02/2014
2
x
Safety
2 Safety
2.1 Observing instructions
This instruction is the >>
Original Version
<< in your language.
Please read this manual carefully and thoroughly before pro-
ceeding with the installation or modification of the heating
system.
These instructions are intended for authorised and trained
heating and sanitation experts who have experience in the proper
installation and maintenance of heating systems and hot water
storage tanks by virtue of their technical training and knowledge.
This manual provides all the necessary information for instal-
lation, start-up and maintenance, as well as basic information on
operation and settings. Please go through the attached docu-
ments for a detailed description of operation and control.
All heating parameters needed for smooth operation are already
factory-set. Please refer to other relevant documents for infor-
mation on setting the control.
Relevant documents
– ROTEX A1 BO:
– For the operator
– Operating manual for the operator.
– ROTEX RoCon BF Controller": Control System Instructions
The documents are included in the scope of supply.
2.2 Warning signs and explanation of symbols
Meaning of the warnings
Warnings in this manual are classified according into their se-
verity and probability of occurrence.
Special warning signs
Some types of danger are represented by special symbols:
Order number
Notes related to Order numbers are identified by the cart
symbol .
Handling instructions
Ɣ
Instructions on actions are shown as a list. Actions of which
the sequential order must be maintained are numbered.
Î
Results of actions are identified with an arrow.
2.3 Avoid danger
ROTEX Oil condensing boiler conforms to the state-of-the-art
and meets all recognised technical requirements. However,
improper use may result in serious physical injuries or death, as
well as property damage. Install and operate only ROTEX Oil
condensing boiler to avoid danger:
– as stipulated and in perfect condition,
– with an awareness of the safety and hazards involved.
This assumes knowledge and use of the contents of this manual,
the relevant accident prevention regulations and the recognised
safety-related and occupational medical rules.
2.4 Proper use
The ROTEX A1 BO may only be used for the heating of hot water
heating systems. It must be installed, connected and operated
only according to the information in this manual.
The ROTEX A1 BO may only be operated with the integrated cir-
culation pump and only in combination with a controller approved
by ROTEX.
Any other use outside the intended use is considered as im-
proper. The operator alone shall bear responsibility for any re-
sulting damage.
Use as intended also involves compliance with maintenance and
inspection conditions. Spare parts must at least satisfy the tech-
nical requirements defined by the manufacturer. This is the case,
for example, with original spare parts.
DANGER!
Draws attention to imminent danger.
Disregarding this warning can lead to serious injury or
death.
WARNING!
Indicates a potentially dangerous situation.
Disregarding this warning can result in serious injury
or death.
CAUTION!
Indicates a situation which may cause possible
damage.
Disregarding this warning can lead to damage to
property and the environment.
This symbol identifies user tips and particularly useful
information, but not warnings or hazards.
Electric power
Risk of burning or scalding.
Risk of poisoning
Danger of chemical burns
