Daikin REYQ72-456XATJU, Service Manual

Page: 182 / 441

Field Settings for Indoor Unit SiUS371901E
169 Field Settings and Test Operation
z
: Available
— : Not available
Note:
∗
1. FXMQ07-48PBVJU only
Field
setting
First
Code
No.
Setting Modes FXMQ-M FXHQ-M FXAQ-P FXLQ-M FXNQ-M FXTQ-TA CXTQ-TA
10 (20)
0 Filter cleaning sign interval
z z z z z
— —
0 Filter sign setting — — — — —
z z
1 Filter type
z
— — — — — —
1 Filter cleaning sign interval — — — — —
z z
2 Thermistor selection
z z z z z z
z
3 Filter cleaning sign
z z z z z z
z
5
Information for intelligent Touch Manager/
intelligent Touch Controller
z z z z z z z
6
Remote controller thermostat control during
group control
z z z z z z z
7 Time for absence area detection — — — — — — —
11 (21)
1 Auxiliary electric heater ON temperature — — —
z z z z
1 Auxiliary electric heater ON/OFF temperature — — — — — — —
2 Auxiliary electric heater OFF temperature — — —
z z z z
3 Setting the airflow rate when heating — — — — — — —
3 Electric heater setting — — — — —
z
—
5 Electric heater capacity setting — — — — —
z
—
6 Setting the rate of human detection — — — — — — —
7 Automatic airflow adjustment — — — — — — —
8 Compensating the temperature around people — — — — — — —
9 Compensating the floor temperature — — — — — — —
12 (22)
0 Optional output switching
z z z z z z
z
1 External ON/OFF input
z z z z z z
z
2 Thermostat switching
z z z z z z
z
3 Airflow setting when heating thermostat is OFF
z z z z z z
z
4 Setting of operation mode to AUTO
z z z z z z
z
5 Auto restart after power failure reset
z z z z z z
z
6 Airflow setting when cooling thermostat is OFF
z z z z z z
z
13 (23)
0 Setting of airflow rate —
z z
— — — —
1 Airflow direction setting — —
z
— — — —
2 Swing pattern settings — — — — — — —
4 Setting of airflow direction adjustment range — —
z
— — — —
5 Setting of static pressure selection — — — — — — —
6 External static pressure settings — — — — — — —
14 (24)
4
Optional kit setting (UV lamp + Humi
Economizer)
— — — — —
z z
5 Residential dry — — — — —
z
z
9 Mold proof operation setting — — — — — — —
11 Gas furnace test mode — — — — — —
z
15 (25)
0 Drain pump operation settings — — — — — — —
1 Humidification when heating thermostat is OFF
z z z z z z z
2 Setting of direct duct connection — —
z
— — — —
3
Interlocked operation between humidifier and
drain pump
z z z z z
— —
5 Individual setting of ventilation
z z z z z z z
1b
4 Display of error codes on the remote controller
z z z z z
z
z
12 Key-lock pattern settings
z z z z z
z
z
14 Setting "restricted / permitted" of airflow block — — — — — — —
1c
0 Room temperature display
z z z z z
z
z
1
Thermistor sensor for auto changeover and
setback control by the remote controller
z z z z z z z
3 Access permission level setting
z z z z z z z
1e 2 Setback availability
z z z z z z z