Daikin OH08-1, Instruction Manual

Page: 68 / 150

Remote Controller (Wireless Type) OH08-1
66 Control Systems
(2) Setting the address of wireless remote controller (It is factory set to “ 1 ” )
〈
Setting from the remote controller
〉
1. Hold down the button and the
button for at least 4 seconds to get the Field Set
mode.
(Indicated in the display area in the figure at right.)
2. Press the button and select a multiple
setting (A/b). Each time the button is pressed the
display switches between “A” and “b”.
3. Press the “ ” button or “ ” button to set the
address.
Address can be set from 1 to 6, but set it to 1 ~ 3
and to same address as the receiver. (The receiver
does not work with address 4 ~ 6.)
4. Press the button to enter the setting.
5. Hold down the button for at least 1
second to quit the Field Set mode and return to the
normal display.
Multiple settings A/b
When the indoor unit is being operating by outside control (central remote controller, etc.), it sometimes
does not respond to ON/OFF and temperature setting commands from this remote controller. Check what
setting the customer wants and make the multiple setting as shown below.
(3) Stick the Unit No. label on
the air outlet of the
decoration panel and the
back of the wireless remote
controller.
[PRECAUTIONS]
Set the Unit No. of the receiver
and the wireless remote controller
to be equal. If the settings differ,
the signal from the remote
controller cannot be transmitted.
Remote controller
Movement when the operation is controlled by the other
air conditioners and equipment
Multiple setting Remote controller display
A: Standard All items displayed.
When operation changeover, temperature setting or the
like is carried out from the remote controller, the indoor
unit rejects the instruction.
(Signal receiving sound “peeh” or “pick-pick-pick”)
As a result, a discrepancy between the operation state of
the indoor unit and the indication of the remote controller
display occurs.
b: Multi System
Operations remain displayed
shortly after execution. Since the indication of the remote controller is turned off,
no discrepancy such as mentioned above occurs.
MODE
TIMER
RESERVE CANCEL
DOWN
UP
/TEST
SWING
FAN
TIME
TEMP
ON OFF
SETTING
3
2
4
1
5
Mode
Address
Multiple
setting
/TEST
FAN
UP DOWN
1 2 3 4 5 6
RESERVE
/TEST
Unit No. label
<Attachment of Unit No. label>