Daikin MCKB70YSAU, Installation & Operation Manual

Page: 17 / 42

16
English
Operation
Operation
WARNING
Do not turn off the unit by removing the power supply plug during operation.
(Fire due to overheating or electric shock may result)
Louver
Please open the louver by hand before operation.
(As the louver is hand-operated, it will not close
automatically at operation end.)
If you want to change the airflow
direction
Adjust the louver to the desired position.
The louver can adjust the airflow in
4 directions.
Approx. 70°
Approx. 80°
When you want to let the unit decide the best operation mode
(AUTO operation)
Fill the water tank with water. ►
Page 14, 15
Attention
• Make sure that the humidifying filter unit is attached when performing this operation.
• Change the water in the humidifying tray and water tank every day.
• Be sure to use tap water for the water in the water tank.
Press .
• Optimum operation will be performed according to the condition of the room.
• The AUTO operation lamp (white) lights up.
• If is pressed during AUTO operation, the lamp corresponding to the current operation mode will blink for about
5 seconds.
Operation mode MODE lamp Humidity setting lamps ECONO MODE lamp
Air Purifying Operation
AUTO FAN
– –
Humidifying Operation
AUTO FAN
Either “ (Low)”, “ (Standard)”, or “ (High)”
–
Monitoring mode – –
Blinking
About AUTO operation
The unit automatically switches between Air Purifying
Operation and Humidifying Operation based on the
indoor temperature and humidity conditions.
• The airflow rate is adjusted automatically. If the
operating sound bothers you, the airflow rate range can
be changed.
►
Page 21, 22
• If the humidity is high, Air Purifying Operation will be
carried out.
• If the air is clean and the set humidity has been reached
(during Humidifying Operation) for about 5 minutes, the
mode automatically switches to Monitoring mode.
►
Page 20
100
90
80
70
60
50
40
30
0
10 1 15 20 25 30
„
Room conditions and operation settings
Room temperature (ºF)
100
90
80
70
60
50
40
30
0
Target humidity (%)
86 77 68 59 50 34
60%
50%
40%
• Pressing during operation will cause operation to stop.
After Humidifying Operation stops, humidifying filter drying operation may be performed automatically. ►
Page 18
If you want to stop humidifying filter drying operation, press again.
Note
• The humidifier lamp lights up during Humidifying Operation.
• The room temperature may drop during Humidifying Operation.
• Splashing sounds may be heard during Humidifying Operation, but this is not a malfunction.
►
Page 35
• If the set humidity is reached or the water supply lamp lights up during Humidifying Operation, Humidifying Operation will stop,
but Air Purifying Operation will continue.
01_EN_3P672685-2A.indd 16 2021/12/13 13:55:56