7
■
English
Indoor Unit Installation
Wall Mounting
3.
Installation
• Install the indoor unit on the wall according to the installation drawings.
1) Hang the indoor unit on the hooks of A mounting plate. (2 places)
2) Fix the three holes in the lower portion of the indoor unit with M4 × 25L screws.
• Work should be performed to match the direction of the piping, as the extension auxiliary pipe (
, supplied) and installa-
tion methods vary depending on the direction the piping is brought out.
1) Select the extension auxiliary pipe in accordance with the
direction of the piping. (This should be done without the
included piping for wall-mounted right-back piping and ceil-
ing-mounted upper right-side piping.)
2) Attach the heat insulation tube
to the extension auxil-
iary pipe. (Make sure there are no gaps.)
3) Attach the extension auxiliary pipe to the product.
Mounting plate
A
Electric component cover
(2 claws)
Front grille
M4
×
25L
J Side cover
(6 claws)
J Side cover
less than 1
A Mounting plate
Indoor unit
hook portion
Condition for installation
M
Bottom-
right piping
Right side
piping
2)
3)
N
01_EN_2P098794-2T.fm Page 7 Wednesday, April 14, 2004 10:50 AM
Summary of Contents for Inverter FLKS25BVMB
Page 15: ... 0408 HT 2P098794 2V M02B074C ...
