9
■
English
Indoor Unit Installation
6.
Insulation of Refrigerant Pipes
After checking for refrigerant leaks
• Joints in liquid pipe and the gas pipe must be insulated with
heat insulation tube attached with
binding bands.
• Cut
heat insulation tube to appropriate length.
7.
Drain Piping
1) Connect the drain hose, as described below.
2) Pour water into the drain pan from the right side to check that water flows smoothly from the drain hose.
3) When drain hose requires extension, obtain an extension hose commercially
available.
After connecting the local drain hose, tape the slits of the heat insulation tube.
P
Q
Binding band
Heat insulation tube
Q
P
P
Do not allow
end of hose to
touch water.
Allow no trap to
form in the piping.
Drain hose must
slope downward.
Ceiling mounting
Wall mounting
Ceiling mounting
Wall mounting
Be sure to attach this
part cut from the
panel.
Indoor unit
drain hose
Extension
drain hose
(Field supply)
Heat insulation
tube (More than
10 mm: Field
supply)
Remove this socket for
Wall mounting .
Tape here
(Field supply)
01_EN_2P098794-2T.fm Page 9 Wednesday, April 14, 2004 10:50 AM
Summary of Contents for Inverter FLKS25BVMB
Page 15: ... 0408 HT 2P098794 2V M02B074C ...
