![background image](http://html.mh-extra.com/html/daikin/im-1068-2/im-1068-2_installation-and-maintenance-data_2460230004.webp)
IM 1068-2 / Page 4 of 28
Installation
General
The installation of this equipment shall be in accordance
with the regulations of authorities having jurisdiction and
all applicable codes. It is the responsibility of the installer to
determine and follow the applicable codes. Sheet metal parts,
self-tapping screws, clips and such items inherently have
sharp edges, and it is necessary that the installer exercise cau-
tion. This equipment is to be installed only by an experienced
installation company which employs trained personnel.
Inspection
When the equipment is received, all items should be carefully
checked against the bill of lading to be sure all crates and
cartons have been received. All units should be carefully in-
spected for damage when received. If any damage is noticed,
the carrier should make the proper notation on the delivery
receipt acknowledging the damage.
The carrier should also fill out a Carrier Inspection Report.
The Daikin Traffic Department should then be contacted.
The unit nameplate should be checked to make sure the volt-
age agrees with the power supply available.
The Type K Series Comfort Conditioner is designed and built
for through-the-wall installation in either new or existing
buildings. The self-contained refrigerant system delivers cool-
ing to the desired space. Heating can be accomplished with
electric resistance or hydronic heat. Each conditioner consists
of the following components:
● Cooling Chassis
● Room Cabinet
● Heat Section
● Wall Box
● Control
● Louver
Figure 1: Type K Unit Components
Summary of Contents for IM 1068-2
Page 26: ...IM 1068 2 Page 26 of 28 ...
Page 27: ...IM 1068 2 Page 27 of 28 ...