![background image](http://html1.mh-extra.com/html/daikin/fvxs35kv1a/fvxs35kv1a_operation-manual_4703969015.webp)
13
■
Air outlet selection
• Make air outlet selection according to what suits you.
When setting the air outlet selection switch to
.
• Air conditioner automatically decides the appropriate blowing pattern depending on the operating
mode/situation.
When setting the air outlet selection switch to
.
• Regardless of the operating mode or situation, air is emitted from the upper air outlet.
• Use this switch when you do not want air coming out of the lower air outlet. (While sleeping, etc.)
CAUTION
Mode
Situation
Blowing pattern
COOL
(
)
When the operation is activated or
when the room is not fully cooled.
Air is emitted from the upper and
lower air outlets in order to reach
the set temperature quickly.
When the room has become fully
cool, or when 1 hour has passed
since turning on the air conditioner.
Air is emitted only from the upper
air outlet so that air does not come
into direct contact with people and
indoor temperature is equalized.
HEAT
(
)
When the operation is activated
or when air emitted is of low
temperature.
Air is emitted only from the upper
air outlet so that air does not come
into direct contact with people.
At times other than the above
situations.
Air is emitted from the upper and
lower air outlets so that warm air is
spread throughout the whole room.
DRY
(
)
Whenever in DRY mode.
Air is emitted only from the upper
air outlet so that air does not come
into direct contact with people.
FAN
(
)
Whenever in FAN mode.
AUTO
(
)
Operates in the actual operation mode of the air conditioner according to the descriptions in this
table. (COOL or HEAT)
• Do not try to adjust the flap by hand.
• When adjusting by hand, the mechanism may not operate properly or condensation may drip
from air outlets.
01_EN_3P278434-4C.fm Page 13 Thursday, August 18, 2016 11:22 AM