9
To set the clock
Press
1.
.
” is displayed.
” and “ ” blink.
“
“
Press
2.
to set the current day of the week.
Press
3.
.
“
” blinks.
Press
4.
to set the clock to the present time.
Holding down button rapidly increases or decreases the time display.
•
Press
5.
.
Point the remote controller at the indoor unit when pushing the buttons when setting the
•
indoor unit’s internal clock.
“
” blinks.
NOTE
If the indoor unit’s internal clock is not set to the correct time, ON/OFF TIMER and WEEKLY TIMER will not operate punctually.
•
Tips for saving energy
Be careful not to cool (heat) the room too much.
•
Keeping the temperature setting at a moderate level helps save energy.
Cover windows with a blind or a curtain.
•
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
A clogged air
fi
lter causes inef
fi
cient operation and wastes energy. Clean it once every 2 weeks.
•
Please note
The air conditioner always consumes a small amount of electricity even while it is not operating.
•
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
•
Use the air conditioner in the following conditions.
•
Mode
Operating conditions
If operation is continued out of this range
COOL
Outdoor temperature : 10-46°C
Indoor temperature : 18-32°C
Indoor humidity : 80% max.
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
•
HEAT
Outdoor temperature : –15-24°C
Indoor temperature : 10-30°C
A safety device may work to stop the operation.
•
DRY
Outdoor temperature : 10-46°C
Indoor temperature : 18-32°C
Indoor humidity : 80% max.
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
•
Operation outside this humidity or temperature range may cause a safety device to disable the system.
•
Recommended temperature setting
For cooling: 26-28°C
For heating: 20-24°C
01_EN_3P278434-5C.indd 9
01_EN_3P278434-5C.indd 9
8/18/2016 1:21:08 PM
8/18/2016 1:21:08 PM