English
30
9. MOUNTING CORNER COVER · SUCTION GRILLE
〈〈
For test operation without the corner cover, first refer to “11. TEST OPERATION”
〉〉
•
For backward and rightward piping outlet, cut the corner cover as shown in
Fig. 47
and remove it.
(When cutting, give caution and mount on the indoor unit so that the parts for the corner cover may not fall
off.)
•
Attach the corner cover to the indoor unit.
Then, fix the corner cover with the attached screws (14) while pressing the corner cover so that the end of
the corner cover and the end of the indoor unit contact together.
(Refer to Fig. 48)
•
After attaching the suction grille in opposite order mentioned in the clause “
4. PREPARATION BEFORE
INSTALLATION - (3)”
(Refer to Fig. 49-
(1)
)
, hook the strap (a) for preventing the suction grille from falling
(Refer to Fig. 49-
(2)
)
.
Fig. 47
Piping penetrating place
Cut with saw blade.
Cut with a saw blade.
Give caution so that
it may not fall off.
Give caution so that
it may not fall off.
Piping penetrating place
For rightward piping outlet
For backward piping outlet
Coner cover
Coner cover
Fig. 48
Have the end of the corner cover
and the end of the indoor unit
contact together. (all 4 corners)
Have the end of the corner cover and the
end of the indoor unit contact together.
(all 4 corners)
Corner cover
Screw (14) (accessory)
Screw (14) (accessory)
Corner cover
Screw (14) (accessory)
Corner cover
Screw (14) (accessory)
Indoor unit
Screw (14) (accessory)
Corner cover
01_EN_3P177351-6P.fm Page 30 Sunday, September 30, 2012 1:52 PM
