33
Care and Cleaning
1.
Take off the titanium
apatite photocatalytic air-
purifying filter.
•
Open the upper front panel and pull out the air filters.
•
Hold the recessed parts of the frame and unhook
the 4 claws.
Claw
2.
Clean or replace the titanium
apatite photocatalytic air-
purifying filter.
[Maintenance]
2-1
Vacuum dusts, and soak in
lukewarm water or water for about
10 to 15 minutes if dirt is heavy.
•
Do not remove the filter from frame when
washing with water.
2-2
After washing, shake off remaining
water and dry in the shade.
•
Since the material is made out of polyester, do not
wring out the filter when removing water from it.
[Replacement]
Remove the filter from the filter
frame and attach a new one.
•
Do not throw away the filter frame. Reuse the
filter frame when replacing the titanium apatite
photocatalytic air-purifying filter.
•
When attaching the filter, check that the filter is
set in the tabs.
Tabs
•
Dispose of the old filter as non-flammable waste.
3.
Set the filters as they were and
close the upper front panel.
NOTE
•
Operation with dirty filters:
– cannot deodorise the air,
– cannot clean the air,
– results in poor heating or cooling,
– may cause odour.
•
Dispose of old filters as non-flammable waste.
•
To order titanium apatite photocatalytic air-purifying
filter, contact the service shop where you bought the air
conditioner.
Item
Titanium apatite photocatalytic
air-purifying filter (without frame) 1 set
Part No.
KAF970A46
Titanium apatite photocatalytic air-purifying filter
1) Close the upper
panel.
2) Do NOT push on the
front panel to close
it.
3) Turn ON the unit by
remocon. Wait till the
panels are
completely open.
Then, turn OFF the
unit by remocon
again.
4) Once the front
panels close
completely, gently
push the upper front
panel to hook it into
position.
“click”
“click”
ON/OFF
“click”
1)
2)
3)
4)
