English
32
CAUTION
•
Do not touch the aluminium fins by bare hand at the time of dismounting or mounting the filter.
1.
Pull out the air filters.
•
Open the upper front panel.
•
Set the panel support plate between the ribs on
the unit to fix the upper front panel.
•
Push the filter tab at the center of each air filter a
little upwards, then pull it down.
3) Pull down
2) Push
Filter tab
1) Pull
Panel support plate
Ribs
Back of the upper
front panel
2.
Wash the air filters with
water or clean them with
vacuum cleaner.
•
It is recommended to clean the air filters every
2 weeks.
If the dust does not come off easily
•
Wash the air filters with neutral detergent thinned with
lukewarm water, then dry them up in the shade.
•
Be sure to remove the titanium apatite photocatalytic
air-purifying filter. Refer to “
Titanium apatite
photocatalytic air-purifying filter
” on the next page.
3.
Set the filters as they were
and close the upper front
panel.
Air filter
1) Close the upper
panel.
2) Do NOT push on the
front panel to close
it.
3) Turn ON the unit by
remocon. Wait till the
panels are
completely open.
Then, turn OFF the
unit by remocon
again.
4) Once the front
panels close
completely, gently
push the upper front
panel to hook it into
position.
“click”
“click”
ON/OFF
“click”
1)
2)
3)
4)