Display
5
Names of Parts
Indoor Unit
•
Appearance of the indoor unit may differ.
Air inlet
Upper front
panel
Air outlet
Louvres (vertical blades)
•
The louvres are inside of the air outlet.
Page 13
INTELLIGENT EYE
sensor
•
It detects the movements
of people and automatically
switches between normal
operation and energy
saving operation.
Page 15
Flaps
(horizontal
blades)
Page 13
INTELLIGENT EYE lamp
(green)
Page 16
Signal receiver and Indoor
unit ON/OFF switch
Signal receiver
•
It receives signals from the remote
controller.
•
When the unit receives a signal, you will
hear a beep sound.
Case
Sound type
Operation start
beep-beep
Setting changed
beep
Operation stop
long beep
Indoor unit ON/OFF switch
•
Press this switch once to start operation.
Press once again to stop it.
•
For the operation mode setting, refer to the following
table.
Mode
Temperature setting
Airflow rate
AUTO
25°C
AUTO
•
This switch can be used when the remote controller is
missing.
TIMER lamp
•
When operation by timer has been set, the multi-monitor lamp
periodically changes to orange. After lighting orange for about
5 seconds, it returns to the colour of the operation mode.
The multi-monitor lamp will turn orange on and off in cyclic
manner while the air conditioner is not in operation.
TIMER lamp colour
TIMER lamp colour : For COOL
Orange
Blue
3 min.
5 sec.
5 sec.
2 sec.
2 sec.
2 sec.
Green
Orange
DRY :
COOL : Blue
Orange
HEAT : Red
Orange
FAN : White
Orange
Stop : Off
Orange
Indoor temperature
sensor
•
It detects the air
temperature around the
unit.
Multi-monitor lamp and
TIMER lamp
Multi-monitor lamp
•
The lamp colour changes according to
the operation.
Operation
Multi-monitor lamp
AUTO
Red/Blue
DRY
Green
COOL
Blue
HEAT
Red
FAN
White
TIMER
Orange
Lower front panel
•
It is located on the back of the
upper front panel during operation.
