![background image](http://html1.mh-extra.com/html/daikin/ftxg20lv1bs/ftxg20lv1bs_operation-manual_2459434010.webp)
9
Preparation before Operation
To set the batteries
Position and
correctly!
+
–
2
3
1
Slide the front cover to take it off.
1.
Set 2 dry batteries AAA.LR03 (alkaline).
2.
Set the front cover as before.
3.
To
fi
x the remote controller holder on the wall
Remote
controller holder
Remote controller
Screws
Choose a place from where the signals
1.
reach the unit.
Fix the holder to a wall, a pillar, or similar
2.
location with the screws procured locally.
Place the remote controller in the remote
3.
controller holder.
The luminance of the indoor unit display can be set.
•
Press
.
NOTE
Notes on batteries
When replacing the batteries, use batteries of the same type, and replace both old batteries together.
•
When the system is not used for a long time, take the batteries out.
•
The batteries will last for approx. 1 year. If the remote controller display begins to fade and the degradation of reception performance occurs
•
within a year, however, replace both batteries with new, size AAA.LR03 (alkaline).
The attached batteries are provided for the initial use of the system.
•
The usable period of the batteries may be short depending on the manufactured date of the air conditioner.
Notes on remote controller
Never expose the remote controller to direct sunlight.
•
Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.
•
Signal communication may be disabled if an electronic-starter-type
fl
uorescent lamp (such as inverter-type lamps) is in the room. Consult
•
the shop if that is the case.
If the remote controller signals happen to operate another appliance, move that appliance to somewhere else, or consult the service shop.
•
To set the luminance of the display
Hi
Low
Off
01_EN_3P357704-1.indd 9
01_EN_3P357704-1.indd 9
12/17/2013 3:21:59 PM
12/17/2013 3:21:59 PM