![background image](http://html1.mh-extra.com/html/daikin/ftxg20lv1bs/ftxg20lv1bs_operation-manual_2459434034.webp)
33
Care and Cleaning
Take off the titanium
1.
apatite photocatalytic air-
purifying
fi
lter.
Open the upper front panel and pull out the air
fi
lters.
•
Hold the recessed parts of the frame and unhook
•
the 4 claws.
Claw
Clean or replace the titanium
2.
apatite photocatalytic air-
purifying
fi
lter.
[Maintenance]
Vacuum dusts, and soak in
2-1
lukewarm water or water for about
10 to 15 minutes if dirt is heavy.
Do not remove the
fi
lter from frame when
•
washing with water.
After washing, shake off remaining
2-2
water and dry in the shade.
Since the material is made out of polyester, do not
•
wring out the
fi
lter when removing water from it.
[Replacement]
Remove the
fi
lter from the
fi
lter
frame and attach a new one.
Do not throw away the
fi
lter frame. Reuse the
•
fi
lter frame when replacing the titanium apatite
photocatalytic air-purifying
fi
lter.
When attaching the
fi
lter, check that the
fi
lter is
•
set in the tabs.
Tabs
Dispose of the old
fi
lter as non-
fl
ammable waste.
•
Set the
fi
lters as they were and
3.
close the upper front panel.
Return the panel support plate to its previous position.
•
Lower the lower front panel to the original position.
•
Close the upper front panel slowly.
•
Press the upper front panel at both sides.
•
NOTE
Operation with dirty
fi
lters:
•
cannot deodorise the air,
–
cannot clean the air,
–
results in poor heating or cooling,
–
may cause odour.
–
Dispose of old
fi
lters as non-
fl
ammable waste.
•
To order titanium apatite photocatalytic air-purifying
•
fi
lter, contact the service shop where you bought the air
conditioner.
Item
Titanium apatite photocatalytic
air-purifying
fi
lter (without frame) 1 set
Part No.
KAF970A46
Titanium apatite photocatalytic air-purifying
fi
lter
01_EN_3P357704-1.indd 33
01_EN_3P357704-1.indd 33
12/17/2013 3:22:25 PM
12/17/2013 3:22:25 PM