background image

 

INSTALLATION MANUAL AND USERS GUIDE 

Multi Split Series – Ductless Split – Cassette Indoor unit 

 

 

04006020101 

© Sedna Aire Europe GmbH 

10/2012 

 

CM - Multi Split Series 

R-410A Ultra High Efficiency Cassette Indoor unit 

Cassette: 2,5 – 5 kw Capacity 

 

 

 

 

 

 

Sedna Aire now offers ductless Multi split heat pumps that use the more efficient and 
environmentally friendly refrigerant (R-410A). The ductless system allows very easy 
integration into existing surroundings without major investment in ducts or radiators. It 
contains one outdoor and up to five indoor unit Wall mounted and/or Cassettes) and is 
especially dedicated to straight forward applications where more than one indoor unit are 
needed.   
The new CM Series of Sedna Aire heat pumps offers outstanding performance as well as 
environmental protection. These models with their high efficient compressors  in DC-Inverter 
technology offer when matched with our SolarcoolTM panel efficiency rates 2-3 times better 
than current comparables best-in class systems:  EER: 8 for Cooling and 

 

COP: 8 for Heating. 
Cassettes are available for assembly in ceilings allowing luxury design and air distribution in 
all 4 directions. They are available in Euro-Grid (CMC-12/18) and non-Euro-Grid (CMC24). 
The manual explains the use and installation of the indoor cassettes only. The use and 
installation of the outdoor systems is described in other manuals 

SolarCool

TM

The Hotter it Gets, The Better It Works!

 

 
 

 

 

Summary of Contents for CM Multi Split Series





















Reviews: