3
■
English
Accessories
A Mounting plate
1
B
Mounting plate fixing screw
3/16” × 1” (M4 × 25mm)
7
C
Titanium apatite photocatalytic
air-purifying filter *
1
*
2
2
D
Wireless remote controller
1
E
Remote controller holder
1
F
Fixing screw for remote controller
holder 1/8” × 13/16” (M3 × 20mm)
2
G Dry battery AAA. LR03(alkaline)
2
H
Indoor unit fixing screw
3/16” × 1/2” (M4 × 12mm)
2
J
Insulation tape
1
K
Operation manual
1
L Installation manual
1
*
1
Only for FTX(K)09/12/18/24
*
*
2
09/12 class: without frame
18/24 class: with frame
Choosing an Installation Site
Before choosing the installation site, obtain user approval.
1�
Indoor unit
The indoor unit should be positioned in a place where:
1) the restrictions on the installation requirements specified in
“Indoor unit installation drawings”
on page 4 are met,
2) both the air inlet and air outlet are unobstructed,
3) the unit is not exposed to direct sunlight,
4) the unit is away from sources of heat or steam,
5) there is no source of machine oil vapour (this may shorten the indoor unit service life),
6) cool/warm air is circulated throughout the room,
7) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may affect the remote
controller range,
8) the unit is at least 3.3ft (1m) away from any television or radio set (the unit may cause interference with the picture or
sound),
9) no laundry equipment is nearby.
2�
Wireless remote controller
Turn on all the fluorescent lamps in the room, if any, and find a location where the remote controller signals are properly
received by the indoor unit (within 23ft (7m)).
01_EN_3P379970-1.indd 3
10/17/2014 12:57:22 PM
