Daikin FTX-N/U, Manual

Page: 365 / 484

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E
363
3P202922-2B
11
Timer Operation
To select the ONE TIME timer
mode:
1
Press to select the ONE TIME
timer mode.
Each time the button is pressed,
the modes change as follows.
The Timer Operation feature automatically turns off operation when you go to sleep and turns it back
on when you wake up.
Use the DAILY Timer mode on weekdays, and the ONE TIME timer mode on weekends.
To cancel the timer settings:
1
Press to clear the timer settings.
Precautions in setting the timer
Before starting the timer operation, make sure
the current time is correct. If not, set the clock
correctly. ( page 5)
In making time settings, is displayed to
make it easy to disable the timer too.
If one minute has passed before making any
timer setting, the previous timer settings are
reintroduced and the timer is on standby.
In this case, use the
(time setting) button
and make your desired timer settings.
ONE TIME timer
DAILY timer
TIMER OFF
ON time
OFF time
(Timer settings displayed)
1
2·4·6
3·5
The timer lamp lights up.
The ONE TIME or
DAILY TIMER disappears
from the display, and the
timer lamp goes out too.
Notes
Even when the timer has been off, its
programmed settings are still in memory.
If the system has the timer control ON but
you start and stop it manually using the
ON/OFF button before the designated ON
time, the system will restart again at the
programmed ON time.
Timer operation
When the ON timer is programmed, the
system starts one hour (maximum) earlier
so that the temperature set by the remote
controller is reached just in time.
When the ONE TIME timer is programmed,
the current time is no longer displayed.