background image

7 Maintenance and service

Installation and operation manual

10

FHA-A(9)

Split system air conditioner

3P668115-4E – 2022.11

Operation

Description

Hot start

During hot start, the indoor unit fan will stop
operation, and the following icon will appear on the
home screen:

6.2.3

Adjusting the airflow direction

The following airflow directions can be set:

Up and down direction

 (horizontal blades): Using user interface

(fixed position or swing)

Left and right direction

 (vertical blades): Manually (fixed position

only)

a

b

b

a

Horizontal blades (up and down direction)

b

Vertical blades (left and right direction)

Up and down airflow direction setting

INFORMATION

For  setting  procedure  of  the  airflow  direction,  see  the
reference guide or the manual of the used user interface.

When  the  operation  stops,  the  horizontal  blades  at  the  air  outlet
close automatically.

The following airflow directions can be set:

Direction

Display

Fixed position

. The indoor unit

blows air in 1 of 5 fixed positions.

Swing

. The indoor unit alternates

between the 5 positions.

Note:

  The  recommended  position  of  the  horizontal  blades  (flaps)

varies according to the operation mode.

a

b

a

Cooling operation

b

Heating operation

WARNING

NEVER  touch  the  air  outlet  or  the  horizontal  blades  while
the swing flap is in operation. Fingers may become caught
or the unit may break down.

NOTICE

Avoid  operating  in  the  horizontal  direction.  It  may  cause
dew or dust to settle on the ceiling or flap.

Left and right airflow direction setting

The left and right airflow direction can be set only manually in fixed
position.

Make adjustments only after stopping the horizontal blade in order to
avoid injury and damage to the appliance. Set both groups of vertical
blades in a way so airflows do not cross; otherwise condensate may
drip.

a

a

b

a

a

b

a

Airflow

b

Vertical blades

6.3

To operate the system

INFORMATION

For setting of the operation mode, airflow direction or other
settings,  see  the  reference  guide  or  operation  manual  of
the user interface.

7

Maintenance and service

7.1

Precautions for maintenance and
service

NOTICE

Maintenance  MUST  be  done  by  an  authorised  installer  or
service agent.

We  recommend  performing  maintenance  at  least  once  a
year. However, applicable legislation might require shorter
maintenance intervals.

CAUTION: Pay attention to the fan!

It is dangerous to inspect the unit while the fan is running.

Make  sure  to  turn  OFF  the  main  switch  before  executing
any maintenance task.

CAUTION

Do  NOT  insert  fingers,  rods  or  other  objects  into  the  air
inlet or outlet. When the fan is rotating at high speed, it will
cause injury.

NOTICE

NEVER  inspect  or  service  the  unit  by  yourself.  Ask  a
qualified service person to perform this work. However, as
end user, you may clean the air filter, suction grille and the
unit exterior.

Summary of Contents for FHA35AVEB98





























Reviews: