17 Maintenance and service
Installer and user reference guide
27
FCAHG71~140HVEB
Split system air conditioners
4P561449-1A – 2019.09
17.2.2
To clean the suction grille
NOTICE
Do NOT use water of 50°C or higher.
Possible
consequence:
Discoloration and deformation.
1
Open the suction grille.
Standard panel:
1
Design panel:
1
1
2
2
2
Remove the suction grille.
Standard panel:
45°
1
2
Design panel:
1
2
3
Remove the air filter.
1
2
3
4
Clean the suction grille. Wash with a soft bristle brush, and
water or neutral detergent. If the suction grille is very dirty, use
a typical kitchen cleaner, leave it on for 10 min, then wash it
with water.
5
Reattach the air filter and suction grille, and close the suction
grille.
17.2.3
To clean the air outlet and outside panels
WARNING
Do NOT let the indoor unit get wet.
Possible
consequence:
Electric shock or fire.
NOTICE
▪ Do NOT use gasoline, benzene, thinner polishing
powder or liquid insecticide.
Possible consequence:
Discoloration and deformation.
▪ Do NOT use water or air of 50°C or higher.
Possible
consequence:
Discoloration and deformation.
▪ Do NOT scrub firmly when washing the blade with
water.
Possible consequence:
The surface sealing
peels off.
Clean with a soft cloth. If it is difficult to remove stains, use water or
neutral detergent.
17.3
Maintenance after a long stop
period
E.g., at the beginning of the season.
▪ Check and remove everything that might be blocking inlet and
outlet vents of indoor units and outdoor units.
▪ Clean air filters and casings of indoor units (see
26] and
"17.2.3 To clean the air outlet and outside
▪ Turn on the power at least 6 hours before operating the unit in
order to ensure smoother operation. As soon as the power is
turned on, the user interface display appears.
17.4
Maintenance before a long stop
period
E.g., at the end of the season.
▪ Let the indoor units run in fan only operation for about half a day in
order to dry the interior of the units. Refer to
cooling, heating, fan only, and automatic operation"
24] for
details on fan only operation.
▪ Turn off the power. The user interface display disappears.
▪ Clean air filters and casings of indoor units (see
26] and
"17.2.3 To clean the air outlet and outside
17.5
About the refrigerant
This product contains fluorinated greenhouse gases. Do NOT vent
gases into the atmosphere.
Refrigerant type: R32
Global warming potential (GWP) value: 675
Refrigerant type: R410A
Global warming potential (GWP) value: 2087.5
NOTICE
Applicable legislation on
fluorinated greenhouse gases
requires that the refrigerant charge of the unit is indicated
both in weight and CO
2
equivalent.
Formula to calculate the quantity in CO
2
equivalent
tonnes:
GWP value of the refrigerant × total refrigerant
charge [in kg] / 1000
Please contact your installer for more information.
WARNING: FLAMMABLE MATERIAL
The R32 refrigerant (if applicable) in this unit is mildly
flammable. Refer to the outdoor unit specifications for the
type of refrigerant to be used.
