background image

English

4

2. WHAT TO DO BEFORE 

OPERATION

This operation manual is for the following systems 
with standard control. Before initiating operation, 
contact your Daikin dealer for the operation that cor-
responds to your system.

A= Pair system or simultaneous operation system
B= Multi system
1= Unit with remote controller
2= Unit without remote controller (when used as simultaneous 
operation)

NOTE

Read the operation manual that came with the 
remote controller you are using.

If your installation has a customized control system, 
ask your Daikin dealer for the operation that corre-
sponds to your system.

Heat pump type
This system provides COOLING, HEATING, 
AUTOMATIC, PROGRAM DRY, and FAN ONLY 
OPERATION modes.

A

1

2

OUTDOOR

INDOOR

B

OUTDOOR

INDOOR

1

1

Cooling only type
This system provides COOLING, PROGRAM 
DRY, and FAN OPERATION modes.

PRECAUTIONS FOR GROUP CONTROL 
SYSTEM OR TWO REMOTE CONTROLLER 
CONTROL SYSTEM

This system provides two other control systems 
beside individual control (one remote controller con-
trols one indoor unit) system. Confirm the following if 
your unit is of the following control system type.

• Group control system

One remote controller controls up to 16 indoor 
units.
All indoor units are equally set.

• Two remote controllers control system

Two remote controllers control one indoor unit (In 
case of group control system, one group of indoor 
units)

NOTE

Contact your Daikin dealer in case of changing 
the combination or setting of group control and 
two remote controller control systems.

Please do not change the combination and set-
tings for the group operation and two remote con-
troller control systems by yourself, but be sure to 
ask your dealer.

4PEN465287-1C.book  Page 4  Thursday, March 23, 2017  2:47 PM

Summary of Contents for FAA71AUVEB



















Reviews: