background image

4 About the system

Installation and operation manual

7

FAA71+100BUV1B
Split system air conditioner
3P654518-1A – 2021.03

WARNING

The appliance using R32 refrigerant
shall be stored so as to prevent
mechanical damage and in a well-
ventilated room without continuously
operating ignition sources (e.g. open
flames, an operating gas appliance, or
an operating electric heater). The room
size shall be as specified in the
General safety precaution.

WARNING

▪ Do NOT pierce or burn refrigerant

cycle parts.

▪ Do NOT use cleaning materials or

means to accelerate the defrosting
process other than those
recommended by the manufacturer.

▪ Be aware that the refrigerant inside

the system is odourless.

WARNING

R410A is a non-combustible
refrigerant, and R32 is a mildly
flammable refrigerant; they normally
don’t leak. If the refrigerant leaks in the
room and comes into contact with fire
from a burner, a heater, or a cooker,
this may result in a fire (in case of
R32), or the formation of a harmful gas.

Turn off any combustible heating
devices, ventilate the room, and
contact the dealer from where you
purchased the unit.

Do not use the unit until a service
person confirms that the part from
which the refrigerant leaked has been
repaired.

Troubleshooting (see 

"8 Troubleshooting"

 [

4

 11])

WARNING

Stop operation and shut off the
power if anything unusual occurs
(burning smells etc.).

Leaving the unit running under such
circumstances may cause breakage,
electric shock or fire. Contact your
dealer.

4

About the system

WARNING

▪ Do  NOT  modify,  disassemble,  remove,  reinstall  or

repair  the  unit  yourself  as  incorrect  dismantling  or
installation may cause an electric shock or fire. Contact
your dealer.

▪ In case of accidental refrigerant leaks, make sure there

are  no  naked  flames.  The  refrigerant  itself  is  entirely
safe  and  non-toxic.  R410A  is  a  non-combustible
refrigerant,  and  R32  is  a  mildly  flammable  refrigerant,
but  they  will  generate  a  toxic  gas  when  they
accidentally  leak  into  a  room  where  combustible  air
from  fan  heaters,  gas  cookers,  etc.  is  present.  Always
have  qualified  service  personnel  confirm  that  the  point
of  leakage  has  been  repaired  or  corrected  before
resuming operation.

NOTICE

Do  NOT  use  the  system  for  other  purposes.  In  order  to
avoid  any  quality  deterioration,  do  NOT  use  the  unit  for
cooling  precision  instruments,  food,  plants,  animals,  or
works of art.

NOTICE

For future modifications or expansions of your system:

A  full  overview  of  allowable  combinations  (for  future
system  extensions)  is  available  in  technical  engineering
data  and  should  be  consulted.  Contact  your  installer  to
receive more information and professional advice.

4.1

System layout

INFORMATION

The  following  illustration  is  an  example  and  might  NOT
match your system layout.

b

c

a

d

e

a

Indoor unit

b

Outdoor unit

c

User interface

d

Refrigerant trasmission cable

e

Drain pipe

Summary of Contents for FAA-B

























Reviews: