Instruction
SiBE12-713
202
Operation Manual
23
Setting WEEKLY TIMER
using copy mode
• A reservation made once can be easily copied and
the same settings used for another day of the week.
1. Press “
button”.
2. Press “SELECT button” to confirm
the day of the week to be copied.
3. Press “COPY button”.
• This activates copy mode.
• Copy whole reservation of the selected day of the week.
4. Press “SELECT button” to select
the destination day of the week.
5. Press “COPY button”.
• The reservation will be copied to the selected day of the week. The whole reservation of the
selected day of the week will be copied.
• The reservation can be copied to another day of the week in succession.
6. Press “
button”.
• Exit copy mode.
NOTE
COPY MODE
• The entire reservation of the source day of the week is copied in the copy mode.
Detailed settings can be made after the copy is completed.
• Both WEEKLY TIMER and ON/OFF timer cannot be used at the same time. The ON/OFF timer has priority if it is set
while WEEKLY TIMER is still active. WEEKLY TIMER is activated after the reserved ON/OFF timer is completed.
3, 5
1, 6
2, 4
Summary of Contents for F-Series
