![background image](http://html1.mh-extra.com/html/daikin/ewaq004bavp/ewaq004bavp_installers-reference-manual_3243678046.webp)
8 Configuration
Installer reference guide
46
EWAQ+005BAVP
Packaged air-cooled water chillers and packaged air to water heat
pumps
4P492900-1 – 2017.06
X7M
X21A
X21A
X5M
X4M
X3M
1
2
c
a
b
a
Connector – one end of connector cable
b
Clamp terminal – other end of connector cable
c
To control box
WARNING
Provide stress relief to the valve kit connector cable by
attaching it to the cable bundle. Put tie wraps on both sides
of the clamp terminal. Failure to follow this warning may
lead to short-circuit and fire.
3
Connect the 3‑way valve that is part of the valve kit to control
box terminals X8M/6+7+10.
NOTICE
When connecting multiple wires to the same terminal,
make sure they have the same thickness.
10
7
6
X8M
X1M
X4M
X2M
A1P
b
a
L
N
Y
a
From outdoor unit
b
3‑way valve
Y
To X8M/6
N
To X8M/7
L
To X8M/10
7.9
Finishing the outdoor unit
installation
7.9.1
To close the outdoor unit
1
Close the switch box cover.
2
Mount the top plate and the front plate.
NOTICE
When closing the outdoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
7.10
Finishing the control box
installation
7.10.1
To close the control box
1
Close the front plate.
7.11
Finishing the option box
installation
7.11.1
To close the option box
1
Close the front plate.
7.12
Finishing the backup heater
installation
7.12.1
To close the backup heater
1
Close the switch box cover.
2
Close the front plate.
8
Configuration
8.1
Overview: Configuration
This chapter describes what you have to do and know to configure
the system after it is installed.
Why
If you do NOT configure the system correctly, it might NOT work as
expected. The configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪
First time – Quick wizard.
When you turn ON the user interface
for the first time (via the indoor unit), a quick wizard starts to help
you configure the system.
▪
Afterwards.
If necessary, you can make changes to the
configuration afterwards.
INFORMATION
When the installer settings are changed, the user interface
will request to confirm. When confirmed, the screen will
shortly turn OFF and "busy" will be displayed for several
seconds.