Daikin ETVH16S18EA6V, Installer'S Reference Manual

Page: 178 / 284

10 | Configuration
Installer reference guide
178
EPRA14~W1 + ETVH/9W
Daikin Altherma 3 H HT F
4P644737-1 – 2021.02
# Code Description
[5.3] [6-0B] Eco setpoint :
▪ 30°C~min(50,[6‑0E])°C
Reheat setpoint
Desired reheat tank temperature , used:
▪ in Schedule + reheat mode, during reheat mode: the guaranteed minimum
tank temperature is set by the
Reheat setpoint
minus the reheat hysteresis.
If the tank temperature drops below this value, the tank is heated up.
▪ during storage comfort, to prioritize the domestic hot water preparation. When
the tank temperature rises above this value, domestic hot water preparation and
space heating/cooling are executed sequentially.
# Code Description
[5.4] [6-0C] Reheat setpoint :
▪ 30°C~min(50,[6‑0E])°C
Schedule
You can set the tank temperature schedule using the schedule screen. For more
information about this screen, see
"10.3.7 Schedule screen: Example" [
4
138].
Heat up mode
The domestic hot water can be prepared in 3 different ways. They differ from each
other by the way the desired tank temperature is set and how the unit acts upon it.
# Code Description
[5.6] [6-0D] Heat up mode :
▪ 0: Reheat only : Only reheat operation is
allowed.
▪ 1: Schedule + reheat : The domestic hot
water tank is heated according to a schedule
and between the scheduled heat up cycles,
reheat operation is allowed.
▪ 2: Schedule only : The domestic hot water
tank can ONLY be heated according to a
schedule.
See the operation manual for more details.
Disinfection
Applies only to installations with a domestic hot water tank.
The disinfection function disinfects the domestic hot water tank by periodically
heating the domestic hot water to a specific temperature.
CAUTION
The disinfection function settings MUST be configured by the installer according to
the applicable legislation.