Daikin ETSHB16P30EF, Installer'S Reference Manual

Page: 291 / 308

3/16
Breadcrumb Setting name Range, step
Default value
Date Value
Field settings table Installer setting at variance with
default value
2.A [C-05] R/W 1: 1 contact
2: 2 contacts
└─ Delta T
2.B.1 [1-0B] R/W ([2-
0C]
≠ 2)
R/O ([2-
0C] = 2)
3~10°C, step: 1°C
[2-0C]
≠ 2 (Radiator)
5°C
[2-0C] = 2 (Radiator)
10°C
2.B.2 [1-0D] R/W 3~10°C, step: 1°C
5°C
└─ Modulation
2.C.1 [8-05] R/W 0: No
1: Yes
2.C.2 [8-06] R/W 0~10°C, step: 1°C
5°C
└─ Shut off valve
2.D.1 [F-0B] R/W 0: No
1: Yes
2.D.2 [F-0C] R/W 0: No
1: Yes
Main zone
2.E R/W 0: 2-points
1: Slope-Offset
Additional zone
3.4 0: Fixed
1: WD heating, fixed cooling
2: Weather dependent
└─ Heating WD curve
3.5 [0-00] R/W [9-05]~min(45,[9-06])°C, step: 1°C
[2-0C]=0
25°C
[2-0C]=1
35°C
[2-0C]=2
35°C
3.5 [0-01] R/W [9-05]~[9-06]°C, step: 1°C
[2-0C]=0
35°C
[2-0C]=1
45°C
[2-0C]=2
65°C
3.5 [0-02] R/W 10~25°C, step: 1°C
15°C
3.5 [0-03] R/W -40~5°C, step: 1°C
-15°C
└─ Cooling WD curve
3.6 [0-04] R/W [9-07]~[9-08]°C, step: 1°C
[2-0C]=0
18°C
[2-0C]=1
7°C
[2-0C]=2
18°C
3.6 [0-05] R/W [9-07]~[9-08]°C, step: 1°C
22°C
3.6 [0-06] R/W 25~43°C, step: 1°C
35°C
3.6 [0-07] R/W 10~25°C, step: 1°C
20°C
Additional zone
3.7 [2-0D] R/O 0: Underfloor heating
1: Fancoil unit
2: Radiator
└─ Setpoint range
3.8.1 [9-05] R/W 15~37°C, step: 1°C
25°C
3.8.2 [9-06] R/W ([2-
0C]
≠ 2)
R/O ([2-
0C] = 2)
[2-0C]=2:
37~70, step: 1°C
70°C
[2-0C] ≠ 2:
37~55, step: 1°C
55°C
3.8.3 [9-07] R/W 5~18°C, step: 1°C
7°C
3.8.4 [9-08] R/W 18~22°C, step: 1°C
22°C
Additional zone
3.A [C-06] R/W 1: 1 contact
2: 2 contacts
└─ Delta T
Ext Thermostat type
Delta T heating
Delta T cooling
Modulation
Max modulation
During thermo
During cooling
WD curve type
Setpoint mode
Leaving water value for high ambient temp. for LWT add zone
heating WD curve.
Leaving water value for low ambient temp. for LWT add zone
heating WD curve.
High ambient temp. for LWT add zone heating WD curve.
Low ambient temp. for LWT add zone heating WD curve.
Leaving water value for high ambient temp. for LWT add zone
cooling WD curve.
Leaving water value for low ambient temp. for LWT add zone
cooling WD curve.
High ambient temp. for LWT add zone cooling WD curve.
Low ambient temp. for LWT add zone cooling WD curve.
Emitter type
Heating minimum
Heating maximum
Cooling minimum
Cooling maximum
Thermostat type
(*1) 300 Tank_(*2) 500 Tank_
(*3) *X*_(*4) *H*_(*5) *B*_
(*6) *EKECBUA*3V_(*7) *EKECBUA*6V_(*8) *EKECBUA*9W_(*9) BUH less_
(*10) 16P
4P681797-1 - 2022.01