Daikin EKLN140A1, Installation Manual

Page: 2 / 12

About this documentation
Installation manual EKLN140A1
2
Low sound enclosure
4P650154-1
–
2021.03
Table of Contents
1 About this documentation .......................................................... 2
1.1 About this document ...................................................... 2
2 About the box ............................................................................. 2
2.1 Parts .............................................................................. 2
2.2 Accessories ................................................................... 2
3 About the unit and options ......................................................... 3
3.1 Possible combinations ................................................... 3
3.2 Possible options ............................................................ 3
4 Installing the unit ........................................................................ 3
4.1 Preparing the installation location ................................. 3
4.2 Fitting the enclosure ...................................................... 3
4.3 Wiring ............................................................................ 5
4.4 Securing the heat pump ................................................ 6
4.5 Installing the slats .......................................................... 6
4.6 Installing the panels and recirculation seal .................... 8
4.7 Configuration ................................................................. 9
4.8 Maintenance .................................................................. 9
1 About this documentation
1.1 About this document
Latest revisions of the supplied documentation may be available on
the regional Daikin website or via your dealer.
The original documentation is written in English. All other languages
are translations.
Target audience
Authorised installers
Technical data
•
Some of the most recent technical data are available on the
regional Daikin website (publicly accessible).
•
The complete set of the most recent technical data are
available on the Daikin Business Portal (authentication
required).
2 About the box
NOTE
Before commencing work, check the packaging and parts
for damage and ensure that the shipment is complete.
NOTE
All plate work parts are protected with protective film.
Remove the protective film from a part only when you are
about to install it.
2.1 Parts
The box contains the following parts:
•
Base frame profile, front (1×)
•
Base frame profile, rear (1×)
•
Base frame profile, left (1×)
•
Base frame profile, right (1×)
•
Base frame corner brackets (4×)
•
Base frame sealing pad (3×)
•
Support beam, front (1×)
•
Support beam, rear (1×)
•
Support partition, upper (1×)
•
Support partition, lower (1×)
•
Vibration dampers (4×)
•
Rounded rubber (1 m)
•
Support frame sealing pad (1×)
•
Vertical support, left (2×)
•
Vertical support, right (2×)
•
Lower slat (2×)
•
Intermediate slat (8×)
•
Upper slat (2×)
•
Top panel (1×)
•
Side panel, left (1×)
•
Side panel, right (1×)
•
Sealing strips
2.2 Accessories
The box contains the following accessories:
Accessories
(1)
Illustration Description
A Self-tapping bolt M5×16
B Washer M5 nylon DIN 125
–
1 A
C Sealing tape 20 mm
D Nylon plug 8×40
E Coach bolt 6×50
F Sheet-metal washer M6×20
G Round spacer cap
H Spring washer M8
I Nut M8
J Sheet-metal washer M8×30
K Rounded finishing profile, small
L U-shaped finishing profile
M Guide pin Ø8×25 M5
N Spacer bush 15×3
O Spacer bush 12×7
P D-rubber sponge, self-adhesive
Q Cage nut M5