IM
1133-C
DIII-NET COMMUNICATION GATEWAY
31
www.DaikinApplied.com
iTouch Manager Operation
This section describes the operation of the iTouch Manager to monitor and control Daikin Applied Air Handler Units. Refer to
EM11A017 for more information about the operation of the iTouch Manager, available on
www.daikinac.com
.
If the Intelligent Touch Controller is being used, see section “
Intelligent Touch Controller Operation
”
Turning a Unit On and Off
The iTouch Manager allows units to be easily turned on and off directly from the device list screen.
1.
To access the indoor device list, select “All” from the home screen and press down.
2.
Select “Indoor” and press down.
3.
Select the unit to be changed and choose “On” or “Off” from the sidebar. See Figure 48.
Figure 48, Turning Unit On and Off
4.
When prompted, confirm change. See Figures 49. Unit should start/stop within a minute but usually responds in a few
seconds.
Figure 49, Confirm Start/Stop Unit
Selected Unit
On/Off
