![background image](http://html1.mh-extra.com/html/daikin/comfort-flex-cliwp-series/comfort-flex-cliwp-series_control-manual_4699239006.webp)
cm-cliwp-eng
www.comfort-flex.com
6
Features / Benefits
PROPERTY
TEST METHOD
PERFORMANCE
Dry layer thickness
ASTM D7091
0.6-1.2 mils / 15-30 µm
Brightness - 60 degrees
ASTM D523
55-75
Pencil hardness
ASTM D3363
2H minimum
Inmersion water
ASTM D870
1000 hours
Cross hatch adhesion
ASTM D3359
5B
Direct impact
ASTM D2794
160 in-lb
Salt spray corrosion
ASTM B117 / DIN 53167
More of 15,000 hours
Humidity
ASTM D2247
1000 minimum hours
Reduction of heat transfer
--
Less than 1%
Improved flap coating
--
Up to 30 flaps per inch
pH range
--
3-12
Temperature limits
--
-40°F to 325°F / -40°C to 163°C
(Dry load)
TECHNICAL FEATURES
ElectroFin® E-Coat Coil coating corrosion
resistant factory-applied
ElectroFin® E-Coat is a flexible, water-based, cationic epoxy
polymer using an electrodeposition coating process designed
specifically for heat transfer coils in heating, air conditioning and
refrigeration systems. The PPG POWERCRON® HE (high edge)
technology enhances fin edge coverage through a polymerized
through a unique polymer that controls the flow characteristics of
the coating.
Electrofin® E-Coat Meets The Following Testing Standards
• ASTM B117 / DIN 53167 Salt spray test - over
over 15,000 hours.
• ASTM G85 Annex A3 SWAAT Salt Spray Test
with modified salt - 3000 hours.
• Division 23 specification for main construction
VA for High Humidity Installations.
• CID AA-52474A (GSA)