cm-cliwp-eng
www.comfort-flex.com
5
Features / Benefits
EFFICIENCY
CLIWP units are designed to meet the needs of any project for
telecommunications networks, data centers, laboratories, schools,
hospitals and industrial use.
CLIWP units have diverse applications and can be installed
individually or in any combination to achieve the exact capacity of
the project. Their high efficiency and easy operation achieves the
desired temperatures accurately, quickly and with efficient energy
consumption.
The CLIWP units can work 1 + 1 (by means of a separately
purchased sequencer), i.e., one in operation and one in backup.
The units have different connectivity and remote monitoring options
using the most common protocols such as ModBus, BACnet and
TCP/IP.
SELF CONTAINED AND SELF SPACE
SAVING
The CLIWP unit is completely self-contained. All its components
are inside the cabinet. It uses no usable space in the room to
be conditioned, it is installed on an exterior wall with a minimum
volume, without requiring roof areas or exterior floors.
EASY TO INSTALL
The equipment is assembled, wired, charged with refrigerant, oil
and is systematically factory tested to ensure that you will have a
quick and trouble-free installation.
DESIGN
The work carried out by our engineering and development
department has resulted in equipment with high efficiency in design
and optimum performance during operation.
The selection of high quality main components, our quality
processes and the control system during manufacturing, guarantee
a high performance and safety equipment.
All major components are rigorously tested and validated before
installation. Each engineered unit has undergone long hours of
rigorous testing to ensure the efficiency, safety, durability and
quality of the entire system.
All external paint is baked-on and meets the most stringent quality
standards (ASTM-B117 1500 hour salt spray test).
The selection of high-end compressors and heat exchangers
ensures the capacity and high efficiency of the equipment.
All our equipment has a reduced footprint, which facilitates
installation and maintenance maneuvers, being able to make use
of stairs, doors and service elevators to move the equipment.
COMMUNICATION
Our equipment can be connected / integrated through different
communication protocols; such as TCP/IP, ModBUS and BacNet**,
the most common protocols used in the Air Conditioning industry.
Our equipment keeps track of all programmable variables in
real time, such as system load monitoring, specific alarms of the
refrigeration cycle, and the electrical system. As well as detection
of external factors such as fire or flood (optional sensors).
MAINTENANCE
The simplicity in the design of the equipment allows for maximum
ease of preventive/corrective maintenance. All major components
are available to maintenance personnel by simply opening the
service panels.
If an emergency shutdown occurs, the digital control of the
equipment will indicate in detail the cause of the alarm, helping to
facilitate and accelerate the solution of the alarm.
TESTS
NOTE: The warranty policy requires that startup and
commissioning be performed by qualified
personnel authorized by the manufacturer.
The control system ensures the correct operation of the equipment
by monitoring in real time the condition of the major components
(high or low refrigerant pressure, compressor conditions and
electrical power monitoring).
In case of failure, the event will be recorded for later analysis,
facilitating the location of a possible failure and its solution.
* Depends on the type of control.
** The available communication protocols depend on the type of
control.
This task is charged with the refrigerant necessary for proper
operation based on the customer's installation conditions.
The units are tested at full load operation, thermal load and line
voltage at actual operating conditions.
