Daikin Comfora ATXP20~35L2V1B, Service Manual

Page: 25 / 68

2 Components
Service manual
25
ATXP20~3 FTXP20~7 ARXP20~3
RXP20~71L2V1B
Split Comfora R32
ESIE18-01 – 2019.02
a b c
a Putty
b Expansion valve pipe
c Expansion valve body
a b
a Expansion valve pipe
b Expansion valve body
INFORMATION
The expansion valve and motor can have a different
configuration / layout.
3 Cut the expansion valve pipes using a pipe cutter.
4 Remove the expansion valve body.
5 To install the expansion valve body, see "2.3.2 Repair
procedures" on page 24 .
To install the expansion valve body
1 Install the expansion valve body in the correct location.
2 Wrap a wet rag around the expansion valve body and solder
the refrigerant pipes to the expansion valve body.
CAUTION
Overheating the valve will damage or destroy it.
a b c
a Putty
b Expansion valve pipe
c Expansion valve body
a b
a Expansion valve pipe
b Expansion valve body
INFORMATION
The expansion valve and motor can have a different
configuration / layout.
3 Reinstall the putty.
4 To install the expansion valve motor, see "2.3.2 Repair
procedures" on page 24 .
5 Add refrigerant to the refrigerant circuit, see "3.2.2 Repair
procedures" on page 46 .
About the installation of the expansion valve
motor
NOTICE
Select the correct type.
To install the expansion valve motor with clip
1 Install the expansion valve motor on the expansion valve body.
INFORMATION
The expansion valve motor is equipped with a pipe
retention clip. Install the pipe retention clip over the pipe to
lock the expansion valve motor.